What to Consider When Installing Arlo Cameras

How to install arlo wire free smart home security cameras

Preparing for the installation of your Arlo Cameras is key to ensuring a successful setup. There are a few things to consider before you get started.

• First, decide what type of system you’re installing. Will you be using wire-free cameras, wired cameras, or both?
• You’ll also want to decide what rooms you’re going to be monitoring, and plan out where you’re going to mount the cameras.
• Finally, you’ll want to make sure your network is ready to support the new cameras.

These are just a few of the many considerations you’ll need to make before getting started with your Arlo cameras.

If you are looking to securely access a private network and share data try using a VPN. What is VPN used for?

Virtual Private Network (VPN) is a technology that enables users to securely access a private network and share data remotely through public networks. It is used by individuals and businesses alike for a variety of purposes, ranging from accessing geo-restricted content to protecting sensitive data from cyber attacks. VPNs are also used to bypass censorship and ensure privacy when browsing the web or sending emails. In short, VPNs provide users with an extra layer of security when connecting to the internet.

Determine the best location for your cameras

Installing your Arlo cameras is an important step in setting up or expanding your home or business security system. To get the best results, you need to choose the right locations for maximum coverage and accessibility.

Consider factors such as visibility, access points, cable routing and the area’s lighting when selecting locations for your Arlo cameras. Placing your cameras in highly visible areas around the perimeter of a property can act as a deterrent against theft, while installing them inside can provide more detailed footage of activity within closed spaces.

Keep in mind that outdoor Arlo cameras require power through a nearby outlet or PoE (Power over Ethernet), so you may need to install a wire between the camera and an electrical junction box. Choose cable routing paths wisely when drilling wires through walls, floors or ceilings – pick routes that are safely tucked away from foot traffic or potential dangers like water pipes.

Also ensure that your Arlo camera’s field of view isn’t blocked by anything like foliage or large sculptures to maximize coverage and reliability of your security system. Finally, try to select locations which are well lit – certain models may require some additional lighting fixtures to work properly.

Taking on board all these tips should mean that you install your Arlo Camera system with far less stress and much greater success so take care when choosing where they should go – it will be well worth it!

Gather the necessary tools and materials

Before you begin, make sure to gather the necessary tools and materials. You should have your Arlo cameras, their mounting screws and anchors, a Phillips-head (cross-headed) screwdriver or power drill for fixing the camera mounts to your walls or ceilings, Ethernet cable, and if desired – other extension kits or devices such as Arlo security lights or Arlo Chime.

It is also recommended to have a ladder, masking tape and a notepad for writing down notes and steps as you progress with your installation. Additionally, make sure that you remember that mounting the cameras outdoors requires different weatherproof considerations like rigorous testing against small particles of dust and sand that could damage the cameras’ delicate parts over time. Thus, it is important to ensure that if you are installing an outdoor camera it is in a location where it has plenty of clearance from small particles of dust and sand while still in an area with good reception.

Read the user manual

In order for you to get the most out of your Arlo camera, it is important that you read the user manual that comes with it. The manual contains detailed instructions on how to install and mount your camera. It also provides useful information on what accessories you may need in order to properly install your device. Additionally, the user manual outlines important steps that must be taken in order to configure and set up a secure connection between your device and the Arlo app or MyDVR service.

The installation process should take approximately 15 minutes or less if all appropriate steps are followed and a secure connection is established during setup. Depending upon the number of Arlo cameras you’re using, you may need additional cords, mounts, screws, wall anchors and they will be outlined within the included user guide booklet.

In addition to thoroughly reading through the user manual before beginning installation of your Arlo cameras, it would be wise to consider any safety measures necessary for mounting some devices onto walls or ceilings such as safety harnesses if an elevated height might be used. It is also important to ensure that any wiring used for power plugging doesn’t present any potential hazards such as being tucked tightly away from small children or near water sources such as bathtubs etc.

Installation

Installing Arlo cameras is easier than ever! Whether you’re adding a new camera, replacing an existing camera, or just getting started with Arlo, the installation process is simple. This article will provide a step-by-step guide to help you install your Arlo wire-free security camera quickly, easily, and confidently. Let’s get started!

1. Step 1:
2. Step 2:
3. Step 3:
4. Step 4:
5. Step 5:

Mount the camera to the wall or ceiling

When installing Arlo Pro and Arlo Pro 2 cameras, you can mount them to the wall or ceiling. One way to determine the proper angle for the camera is place it at eye level. This will help to ensure that you are able to get a clear view of your area in one glance without having to move your head up and down or side-to-side.

In addition, you should make sure that there is ample light in your space to ensure optimal video recording even in nighttime conditions. It is also important to make sure that your camera’s lens is not obstructed by objects such as furniture or plants.

In order to mount your Arlo Pro or Arlo Pro 2 camera properly, it is important to consider both the positioning of the screws and the stability of the base plate before drilling any holes in walls or ceilings. To prevent damage from studs and pipes it is best practice to locate these prior drilling with a stud finder device. Additionally, when attaching the base plate you should make sure that all four screws are tight enough so that there is minimum vibration when adjusting angles during operation. Finally, confirm that all components have been tightened correctly before placing batteries into their slots and finishing installation.

Connect the camera to the base station

In order to get your Arlo cameras up and running, you’ll need to first connect them to the base station. This process is relatively easy – here are the steps:

1. Plug in the base station into a power outlet and connect it to your router with an Ethernet cable.
2. Place the Arlo camera within 300 feet of the base station and wait for the LED light on the back of the camera to turn green, which indicates that it has successfully connected via Wi-Fi or a mesh network. If you have an Arlo Pro or Pro 2 camera, there will be a sync button on top that needs to be pressed before connecting.
3. Once connected, follow any provided Arlo installation instructions to complete setup and configure any additional settings like motion alerts and motion zones as needed before using your cameras.

These are just general steps – you should also refer to your specific model’s documentation for more detailed instructions on connecting your cameras properly and using them securely.

Connect the camera to your Wi-Fi network

The first step in installing Arlo cameras is to connect the device to your home’s Wi-Fi network. This will allow you to monitor your camera remotely, as well as make adjustments and access videos from anywhere.

When connecting your Arlo camera, it is important to consider the distance from your router. The farther away you are from the router, the weaker the connection will be, which can lead to unreliable streaming or long buffering times. If you are having difficulty with connection, try relocating your camera closer to the router.

You can also enhance the connection speed by using a range extender or Wi-Fi booster if available. Extenders help extend wireless signals for stronger reception, allowing for more reliable streaming speeds over longer distances.

In addition to setting up your mobile device for data monitoring and user authentication purposes, it is also necessary to properly configure the settings of your Arlo camera. This includes password protection and other security measures that help ensure that only authorized users have access to view footage and recordings of activities happening around an Arlo camera’s vicinity. It is important not only for security purposes but ensuring maximum performance and streaming quality as well.

Setup

Installing Arlo wire free smart home security cameras does not have to be a long and complicated process. As long as you consider the important factors ahead of time, you will be able to easily set up your cameras without any problems.

Some of the key factors to consider when installing Arlo cameras include:

• The range and power of the camera.
• The location of the camera.
• The type of connection.

Let’s look at each of these factors in more detail.

Download the Arlo app

The first step to installing Arlo cameras is to download and install the free Arlo app from your device’s app store. The app is available for both Android and iOS devices including phones, tablets and computers. Be sure to download the correct version of the Arlo app for your device.

Once you have downloaded the Arlo app, open it up on your device and log in. If you are new to Arlo, you will be asked to create a new account. Once logged in, you should see a dashboard that provides an overview of your connected cameras.

Next, you will need to sync your camera with the base station or router that it will be connected to in order for it to work properly. As part of this process, you may be asked to enter a code found on the product packaging or on a sticker attached to the product itself. After syncing is complete, make sure that your camera is powered on so that it can connect properly with other devices via Wi-Fi connection. Finally, place the camera in its desired location and start watching live video feeds from its web browser or mobile device!

Configure the camera settings

Once your Arlo camera or cameras are connected to the base station, it’s important to configure their settings for optimal operation. Many settings can be managed from the Arlo app on your mobile device, and others from the web-based dashboard. This is an essential part of getting ready to set up face recognition.

For each camera, begin by setting the motion detection sensitivity level appropriately – not too low and not too high. Place cameras so that they provide wide views without pointing right at a window (glare can disrupt video) and be sure to maintain other devices and appliances a safe distance away to prevent interference with your Wi-Fi signal. If you’re using multiple cameras in close proximity, adjust their channels so that they don’t conflict with each other offering a cleaner signal.

Finally, configure the video settings on each camera; this step is especially important if you have multiple cameras rather than just one. Depending on the setting chosen in this area, some videos may appear sharper than others overall. Choose options carefully as these changes will apply system-wide and will impact playback quality when viewing or sharing recorded footage across platforms.

Create an Arlo account

Before setting up your Arlo system, it is important to create an Arlo account. This will allow you to access your system remotely, control your settings, and customize notifications.

Creating an Arlo account is easy. Simply open the Arlo app and follow the instructions provided by the app. It will ask for some basic information such as your name and email address. Once created, you will be prompted to log in with your new credentials each time you use the app or web portal. Additionally, creating an Arlo account will give you access to 24/7 customer service support and secure storage of your recordings in our cloud servers.

Creating a secure Arlo account can help keep you safe and organized when it comes to setting up and managing the system. With an account in place, be sure to take advantage of other features such as:

• setting custom zones for motion detection
• adjusting night vision settings remotely from anywhere with internet access.

Maintenance

When it comes to installing Arlo Cameras for your home security needs, there is more to consider than just the installation itself. Maintenance of your Arlo Cameras once they are installed is important in order to keep them functioning optimally.

In this section, we’ll go over the type of maintenance necessary for Arlo Cameras, and how to best maintain them:

Check the camera battery levels

Before installing an Arlo camera, it is important to check the battery levels. If a camera has low battery level(s), its performance may be affected and it may require frequent recharging or need to be replaced altogether.

To check the battery level(s), insert batteries into the Arlo camera, connect the camera to your router and open the Arlo app. From there you can view a list of available Arlo devices and navigate to your chosen device’s settings page; here you can find detailed instructions on how to check the battery level(s) for each device.

It is also important that users take into account what type of batteries are required for their specific model of Arlo camera; some cameras require alkaline or lithium batteries, while others only need rechargeable lithium-ion batteries. Additionally, users can opt to purchase a power adapter in order to keep their cameras continuously powered without having to replace their batteries often.

By monitoring and maintaining your Arlo’s battery levels regularly, you can ensure that your cameras remain functional for extended periods of time.

Clean the camera lens

Once your Arlo camera is installed, it’s important to keep the lenses and sensors clean for optimal performance. Dust, dirt, and residue can build up over time and impact the camera’s performance. Here is how you can ensure your camera provides a clear view:

1. Locate the lens portion of the Arlo Camera and use a lint-free cloth to gently remove any dust or dirt from the surface.
2. Apply an alcohol swab to the lens and use a circular motion to ensure that all debris has been removed.
3. If needed, there are specialized lens cleaning kits available that contain tools specifically designed for cleaning lenses which can be used instead of an alcohol swab.
4. Finally, use the lint-free or special cloth again to wipe away any of the leftover residue from either process.

It’s important to regularly inspect your camera lenses to identify any potential lasting impacts due to dust or debris build-up before they impact its overall performance.

Test the camera’s motion detection settings

Before you install your Arlo cameras, it’s important to test their motion detection settings and adjust them if necessary. You can do this by setting up the camera in different angles and environments, and then using a mobile device to check the sensitivity of the motion sensors. Once you have tested it out in all possible locations, you can ensure that you have optimum coverage and know where to place the camera for best performance.

It is also important to select a motion detection sensitivity setting that is suitable for your needs. You may find that different settings are more suitable for certain environmental conditions or activities. For example, if an area usually has no activity present then you may want to select a low sensitivity level so that there will be less false alarms from the camera sensor. However, if your environment usually sees a lot of activity then it’s advisable to choose a higher sensitivity so that the camera will be responsive even in these circumstances. To get an optimal setup for your specific situation, consider adjusting or creating custom motion settings for each location or area.

Take into consideration prior knowledge of your environment before selecting whether or when to have motion detection enabled on your Arlo cameras – this way, instead of receiving too many notifications at once, only those applicable will trigger an alarm while providing more reliable security coverage overall.

Troubleshooting

When installing Arlo wire-free smart home security cameras, it is important to consider the troubleshooting that may be required. Potential issues could arise during installation or after the cameras have been set up. If you are not familiar with the installation process, it is important to do your research and understand the tools and best practices required to ensure a successful installation.

Let’s explore the troubleshooting process involved in installing Arlo cameras:

Check the camera’s LED lights

When you set up your Arlo camera, check the LED lights on the front of the camera to confirm that it has power, is connected to a base station and is in range. A blinking blue LED light indicates that the device is attempting to connect to a Wi-Fi network, while a blinking amber LED indicates that there is an issue that needs troubleshooting. When in doubt, refer to your Arlo’s user manual for specific instructions on what each LED light means and how to properly interpret them.

Before you begin troubleshooting an issue with your Arlo camera’s LED lights, make sure that all cords are securely connected and evaluate all setup steps. Be aware of common problems such as connecting cords improperly or placing your Arlo camera too far away from its power source or base station. Additionally, try turning off any other nearby devices (smartphones or laptops) temporarily to see if the Wi-Fi connection improves after removing potential interferences.

If you continue to experience difficulties with connecting your Arlo camera’s LED lights, try resetting your device by:

• Pressing down on the Reset button on its back until it powers off
• Powering it back on again by mashing down of Power button located at the bottom of the device.

If these efforts do not resolve your issue, then contact Arlo Support for further assistance via their online chat option or remote troubleshooting tools.

Check the Wi-Fi connection

Before setting up your Arlo cameras, it is important to verify that the Wi-Fi is functioning properly. Here are a few things you should check before continuing with the set up of your camera:

• Verify that your router is powered on and connected to the internet.
• Ensure that there are no interferences such as metal items between your router and your Arlo products.
• Use a public DNS server, rather than using a private networked one. You can configure this through your router’s settings or you can use a service like OpenDNS or Google Public DNS.
• Ensure any firewall configuration allows access through ports 80 (for HTTP) and 443 (for HTTPS).
• Unplug any other devices from your network which may conflict with the connection strength, or update the firmware on those devices if possible. This includes other cloud services such as DropBox and Google Drive.
• If you have dual band Wi-Fi, try switching to a single band frequency (2.4GHz).
• Check your Wi-Fi connection speeds by running an online speed test such as Ookla’s Speedtest website or go to settings > connections > Wi Fi>speedtest in Google Chrome browser on Android mobile device. The minimum required speed for live streaming video is 1 Mbps upload speed and 2 Mbps download speed per camera.

By verifying that all of these settings are set correctly prior to installing the Arlo cameras, you will be ensuring that each device establishes a strong consistent connection for streaming video over Wi Fi networks securely and with minimal disruptions over time.

Reset the camera

Performing a reset is an important step in the installation process of Arlo cameras, as it will help you make sure that your system is configured properly. After you have placed your camera at the desired location and powered it on, you will need to reset the device.

To reset your Arlo camera:

1. Launch the Arlo app and sign into your account
2. Select the Settings tab
3. Select My Devices
4. Select the name of your camera
5. Select Device Settings
6. Select Factory Reset
7. Confirm by selecting Reset

The device will now complete its factory reset and power down automatically; this may take up to two minutes before it completes successfully. Once it has finished with its reset cycle, power it back up and re-add it to your system with a new username and password combination as prompted by the Arlo app.